阿特拉斯博莱特空压机

        Karl Zischkin Brucha, Thomas Prisching Atlas Copco and Friedrich Fischer Brucha：Founded in 1948, Brucha manufactures high-quality panels that are used in the construction of cold storage and refrigeration halls. The panels come in 15 different insulation thicknesses from 40 mm up to 220 mm and can be used as wall and ceiling coverings on any substructure including wood, steel or concrete. The meat processing and bakery businesses represent two of the company’s most important customer segments for cold and refrigeration storage facilities.

        VSD technology for varying demand for compressed air：Compressed air plays a major role in their facility, which is comprised of four decentralized production halls at its 80,000-square-meter plant. Control air is required for lifting, lowering and turning products, and for pneumatic valves. Service air is also required. In 2012, Brucha installed four oil-injected Atlas Copco rotary screw compressors with variable speed drive (VSD) – one GA 37 VSD, two GA 45 VSDs, and one GA 55 VSD – to supply their varying demand for compressed air. The variable speed driven compressors ensure that compressed air is supplied at the necessary level to meet production demands. This flexible operation results in the highest productivity levels, while minimizing  the energy consumption and thus the total cost of ownership.

        Power consumption reduced by 25%：As Karl Zischkin, production manager at Brucha, explains, “Our network is decentralized, so there is a compressor in each production hall. The old compressed air supply was not equipped with speed-controlled drives and for the most part was over-dimensioned. The associated inefficiency is no longer acceptable when energy prices are high and at a time of increasing energy consciousness. Atlas Copco’s speed-controlled compressors receive the excess capacity plan and still reduce power consumption by approximately 25 %.” With over 60 years of experience, Brucha has always invested in the latest technology, using ultra-modern production systems at its facility. Brucha also takes its commitment to protect the environment very seriously, and Karl Zischkin is extremely pleased with the energy savings the company has realized from its four GA compressors with variable speed drive technology.

        在比利时的维尔赖克，80000平方米的厂房michelhausen奥地利，使用阿特拉斯GA喷油螺杆压缩机同时和变频调速技术可高效的节省约25%的电力能源的损耗，供应给四个生产车间所需要的压缩空气量来满足生产的需求。

        弗里德里希菲舍尔brucha公司在1948年创建，brucha生产优质板是用于建设冷库和制冷的大厅。该小组会在15个不同的绝缘厚度从40毫米至220毫米，可以用在任何木墙和顶棚覆盖物，钢和混凝土，肉类的加工和面包等冷藏设施。

        采用变频VSD技术的空气压缩机，压缩空气在其设施中起着重要的作用，它是由四个分散的生产大厅，在其80000平方米的厂房。控制空气所需的提升，降低和转向产品，和气动阀。Brucha 安装喷油螺杆压缩机变频驱动（VSD）GA-37 空间缺损，GA-55 空间缺损，来满足他们的不同需求的压缩空气。变速驱动压缩机的压缩空气是确保在必要的水平，以满足生产的要求所提供的。这种灵活的操作结果在最高的生产力水平，同时最大限度的减少能量消耗。